M5-128/68-7YC/1 Overview
A mobile phone network consists of 128macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).In the 100-BQFPpackage, you will find it.There are 68 I/Os programmed in it.There are 100 terminations programmed into the device.The terminal position of this electrical component is QUAD.The power source is powered by 5Vvolts.There is a part included in Programmable Logic Devices.Trayshould be used to package the chip.To ensure its reliability, the operating temperature is set to [0].Ideally, the chip should be mounted by Surface Mount.The MACH? 5series comprises this type of FPGA.100pins are programmed on the chip.This device is also capable of displaying [0].The M5-128indicates that related parts can be found.5000gates are used to construct digital circuits.High efficiency requires the supply voltage to be maintained at [0].In order to store data, EEPROMis used.Surface Mountmounts this electronic component.A total of 100pins are provided on this board.It operates at a maximum supply voltage of 5.25V volts.With a minimal supply voltage of [0], it operates.It operates from 5V power supplies.There should be a lower maximum frequency than 167MHz.
M5-128/68-7YC/1 Features
100-BQFP package
68 I/Os
The operating temperature of 0°C~70°C TA
100 pin count
100 pins
5V power supplies
M5-128/68-7YC/1 Applications
There are a lot of Lattice Semiconductor Corporation M5-128/68-7YC/1 CPLDs applications.
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Address decoding
- Cross-Matrix Switch
- DDC INTERFACE
- Dedicated input registers
- LED Lighting systems
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Page register
- PULSE WIDTH MODULATION (PWM)
