M4A5-64/32-10VI48 Overview
64 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.The item is enclosed in a 48-LQFP package.The device is programmed with 32 I/O ports.It is programmed to terminate devices at 48.There is a QUAD terminal position on the electrical part in question.The device is powered by a voltage of 5V volts.It is a part of the family Programmable Logic Devices.It is recommended that the chip be packaged by Tray.Ensure its reliability by operating at -40°C~85°C TA.It is recommended to mount the chip by Surface Mount.FPGAs belonging to the ispMACH® 4A series contain this type of chip.With 48 pins programmed, the chip is ready to use.When using this device, YES is also available.You can find its related parts in the M4A5-64.2500 gates are used to construct digital circuits.If high efficiency is desired, the supply voltage should be kept at 5V.It is recommended that data be stored in EEPROM.In this case, it is mounted by Surface Mount.The pins are 48.This device operates at a voltage of 5.5V when the maximum supply voltage is applied.With a minimal supply voltage of 4.5V, it operates.A power supply of 5V volts is required to operate this device.Currently, there are 516 Programmable I/Os available.It is important to make sure that the maximum frequency is less than 100MHz.
M4A5-64/32-10VI48 Features
48-LQFP package
32 I/Os
The operating temperature of -40°C~85°C TA
48 pin count
48 pins
5V power supplies
M4A5-64/32-10VI48 Applications
There are a lot of Lattice Semiconductor Corporation
M4A5-64/32-10VI48 CPLDs applications.
- Digital systems
- Portable digital devices
- Handheld digital devices
- Battery operated portable devices
- Complex programmable logic devices
- Digital designs
- Field programmable gate
- Address decoding
- D/T registers and latches
- Synchronous or asynchronous mode
