M4A5-128/64-55YNC Overview
Currently, there are 128 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.There is a 100-BQFP package containing it.There are 64 I/Os on the board.Terminations of devices are set to 100.QUAD is the terminal position of this electrical part.A voltage of 5Vprovides power to the device.There is a part in the family Programmable Logic Devices.It is recommended that the chip be packaged by Tray.The device operates at a temperature of 0°C~70°C TA in order to ensure its reliability.Ideally, the chip should be mounted by Surface Mount.The ispMACH® 4A series FPGA is one of these types.In this chip, the 100 pins are programmed.If you use this device, you will also find YES.The M4A5-128 can be used to identify its related parts.For digital circuits, there are 5000 gates. These devices serve as building blocks.Optimal efficiency requires a supply voltage of 5V.For data storage, EEPROM is adopted.There is a maximum supply voltage of 5.25V when the device is operating.Normally, it operates with a voltage of 4.75VV as its minimum supply voltage.A power supply of 5V is required to operate it.250MHz is the maximum frequency.The input signals are detected by 2 dedicated inputs.
M4A5-128/64-55YNC Features
100-BQFP package
64 I/Os
The operating temperature of 0°C~70°C TA
100 pin count
5V power supplies
M4A5-128/64-55YNC Applications
There are a lot of Lattice Semiconductor Corporation
M4A5-128/64-55YNC CPLDs applications.
- Bootloaders for FPGAs
- Address decoders
- Custom state machines
- Digital systems
- Portable digital devices
- Handheld digital devices
- Battery operated portable devices
- Complex programmable logic devices
- Digital designs
- Field programmable gate
