M4A5-128/64-10YNC Overview
There are 128 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).A 100-BQFP package contains the item.It is equipped with 64I/O ports.Devices are programmed with terminations of [0].Its terminal position is QUAD.It is powered from a supply voltage of 5V.This part is in the family [0].It is packaged in the way of Tray.The temperature at which it operates is set to 0°C~70°C TAin order to ensure its reliability.It is recommended to mount the chip by Surface Mount.It is a type of FPGA belonging to the ispMACH? 4A series.A chip with 100pins is programmed.It is also possible to find YESwhen using this device.According to the M4A5-128, its related parts can be found.5000gates are devices that serve as building blocks for digital circuits.High efficiency requires the supply voltage to be maintained at [0].For storing data, it is recommended to use [0].Surface Mountmounts this electronic component.The pins are [0].It operates at a maximum supply voltage of 5.25V volts.Despite its minimal supply voltage of [0], it is capable of operating.A power supply of 5Vis required to operate it.It is recommended that the maximal frequency be lower than 125MHz.The system consists of 264 logic blocks (LABs).There are 2 dedicated inputs used to detect the status of input signals.
M4A5-128/64-10YNC Features
100-BQFP package
64 I/Os
The operating temperature of 0°C~70°C TA
100 pin count
100 pins
5V power supplies
264 logic blocks (LABs)
M4A5-128/64-10YNC Applications
There are a lot of Lattice Semiconductor Corporation M4A5-128/64-10YNC CPLDs applications.
- Reset swapping
- PULSE WIDTH MODULATION (PWM)
- Custom state machines
- Synchronous or asynchronous mode
- Digital multiplexers
- Power up sequencing
- POWER-SAVING MODES
- Boolean function generators
- Pattern recognition
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
