M4A3-512/192-12FAC Overview
512macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.It is embedded in the 256-BGA package.There are 192 I/Os on the board.There are 256 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The terminal position of this electrical component is BOTTOM.An electrical supply voltage of 3.3V is used to power it.It is a part of family [0].The chip should be packaged by Tray.The temperature at which it operates is set to 0°C~70°C TAin order to ensure its reliability.It is recommended to mount the chip by Surface Mount.In this case, it is a type of FPGA belonging to the ispMACH? 4A series.In this chip, the 256pins are programmed.When using this device, YESis also available.The M4A3-512can be used to identify its related parts.20000gates are devices that serve as building blocks for digital circuits.In order to achieve high efficiency, the supply voltage should be maintained at [0].It is recommended to store data in [0].In this case, Surface Mountis used to mount the electronic component.This board has 256 pins.A maximum supply voltage of 3.6Vis used in its operation.In order for it to operate, a supply voltage of 3Vis required.A total of 224 Programmable I/Os are available.Ideally, the maximal frequency should be lower than 83.3MHz Hz.
M4A3-512/192-12FAC Features
256-BGA package
192 I/Os
The operating temperature of 0°C~70°C TA
256 pin count
256 pins
M4A3-512/192-12FAC Applications
There are a lot of Lattice Semiconductor Corporation M4A3-512/192-12FAC CPLDs applications.
- Software Configuration of Add-In Boards
- Page register
- Storage Cards and Storage Racks
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- DMA control
- Bootloaders for FPGAs
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- D/T registers and latches
- Auxiliary Power Supply Isolated and Non-isolated
- Reset swapping
