M4A3-384/192-14SAI Overview
There are 384 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.The item is packaged with 256-LBGA.The device is programmed with 192 I/Os.Devices are programmed with terminations of [0].Its terminal position is BOTTOM.It is powered by a voltage of 3.3V volts.This part is included in Programmable Logic Devices.Ideally, the chip should be packaged by Tray.Due to its reliability, it is operated at a temperature of [0].Ideally, the chip should be mounted by Surface Mount.The ispMACH? 4Aseries FPGA is one of these types.256pins are programmed on the chip.It is also possible to find YESwhen using this device.In accordance with the [0], its related parts are listed.In digital circuits, there are 15000gates, which act as a basic building block.High efficiency requires the supply voltage to be maintained at [0].It is recommended that data be stored in [0].This device is mounted by Surface Mount.This board has 256 pins.With a maximum supply voltage of [0], it operates.A minimum supply voltage of 3V is required for it to operate.A programmable I/O count of 145 has been recorded.It is recommended that the maximum frequency be less than 83.3MHz.
M4A3-384/192-14SAI Features
256-LBGA package
192 I/Os
The operating temperature of -40°C~85°C TA
256 pin count
256 pins
M4A3-384/192-14SAI Applications
There are a lot of Lattice Semiconductor Corporation M4A3-384/192-14SAI CPLDs applications.
- Cross-Matrix Switch
- I/O PORTS (MCU MODULE)
- Digital designs
- STANDARD SERIAL INTERFACE UART
- TIMERS/COUNTERS
- Reset swapping
- D/T registers and latches
- DMA control
- State machine design
- Custom state machines
