M4A3-256/192-10FAC Overview
The mobile phone network has 256 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).It is embedded in the 256-BGA package.There are 192 I/Os programmed in it.There are 256 terminations programmed into the device.This electrical part is wired with a terminal position of BOTTOM.Power is supplied by a voltage of 3.3V volts.It is a part of family [0].It is recommended that the chip be packaged by Tray.The device operates at a temperature of 0°C~70°C TAin order to ensure its reliability.It is recommended to mount the chip by Surface Mount.This type of FPGA is a part of the ispMACH? 4A series.It is equipped with 256 pin count.This device also displays [0].According to the M4A3-256, its related parts can be found.10000gates are used to construct digital circuits.Optimal efficiency requires a supply voltage of [0].Data storage is performed using [0].Surface Mountis used to mount this electronic component.In this case, the maximum supply voltage is 3.6V.The device is designed to operate with a minimal supply voltage of 3VV.There are a total of 224 Programmable I/Os.It is recommended that the maximal frequency be lower than 100MHz.
M4A3-256/192-10FAC Features
256-BGA package
192 I/Os
The operating temperature of 0°C~70°C TA
256 pin count
M4A3-256/192-10FAC Applications
There are a lot of Lattice Semiconductor Corporation M4A3-256/192-10FAC CPLDs applications.
- USB Bus
- DMA control
- Digital multiplexers
- Complex programmable logic devices
- Software-driven hardware configuration
- Digital designs
- Auxiliary Power Supply Isolated and Non-isolated
- Custom shift registers
- Synchronous or asynchronous mode
- Battery operated portable devices
