M4A3-192/96-10VNC Overview
There are 192 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is contained in package [0].The device is programmed with 96 I/Os.Devices are programmed with terminations of 144.This electrical part has a terminal position of QUAD, which serves as an important point of access for passengers and freight.The power supply voltage is 3.3V.There is a part included in Programmable Logic Devices.Tray is the packaging method.To ensure reliability, the device operates at a temperature of 0°C~70°C TA.It is recommended that the chip be mounted by Surface Mount.As part of the ispMACH® 4A series, it is a type of FPGA.144 pins are programmed on the chip.This device is also capable of displaying YES.In accordance with the M4A3-192, its related parts are listed.As a building block for digital circuits, there are 7500 gates.A high level of efficiency can be achieved by maintaining the supply voltage at 3.3V.Data is stored using EEPROM.Surface Mount is used to mount this electronic component.A total of 144 pins are provided on this board.It operates at a maximum supply voltage of 3.6V volts.Initially, it requires a voltage of 3V as the minimum supply voltage.Programmable I/Os are counted up 400.There should be a lower maximum frequency than 100MHz.Input signals are detected using 16 dedicated inputs.
M4A3-192/96-10VNC Features
144-LQFP package
96 I/Os
The operating temperature of 0°C~70°C TA
144 pin count
144 pins
M4A3-192/96-10VNC Applications
There are a lot of Lattice Semiconductor Corporation
M4A3-192/96-10VNC CPLDs applications.
- Timing control
- Interface bridging
- I/O expansion
- Discrete logic functions
- Bootloaders for FPGAs
- Address decoders
- Custom state machines
- Digital systems
- Portable digital devices
- Handheld digital devices
