LC4128ZC-75T100C Overview
There are 128 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.You can find it in package [0].This device has 64 I/O ports programmed into it.There are 100 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.QUADis the terminal position of this electrical part.It is powered from a supply voltage of 1.8V.There is a part included in Programmable Logic Devices.Trayis the packaging method.Due to its reliability, it is operated at a temperature of [0].Ideally, the chip should be mounted by Surface Mount.In this case, it is a type of FPGA belonging to the ispMACH? 4000Z series.There are 100 pins on the chip.If you use this device, you will also find [0].You can find its related parts in the [0].Optimal efficiency requires a supply voltage of [0].It is recommended that data be stored in [0].A Surface Mountis mounted on this electronic component.There are 100 pins on the device.It operates with the maximal supply voltage of 1.9V.Despite its minimal supply voltage of [0], it is capable of operating.There are a total of 8 logic elements or blocks.A total of 680programmable I/Os are available.There is 178.57MHz frequency that can be achieved.To detect the status of input signals, there are 10dedicated inputs.In order to form a fundamental building block, there are 36 logic elements or cells.
LC4128ZC-75T100C Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~90°C TJ
100 pin count
100 pins
LC4128ZC-75T100C Applications
There are a lot of Lattice Semiconductor Corporation LC4128ZC-75T100C CPLDs applications.
- Reset swapping
- TIMERS/COUNTERS
- Power Meter SMPS
- D/T registers and latches
- Wide Vin Industrial low power SMPS
- Page register
- State machine design
- I/O PORTS (MCU MODULE)
- Discrete logic functions
- Complex programmable logic devices
