LC4128B-27T128C Overview
128 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.The item is enclosed in a 128-LQFP package.The device is programmed with 92 I/O ports.It is programmed to terminate devices at 128.There is a QUAD terminal position on the electrical part in question.The device is powered by a voltage of 2.5V volts.It is a part of the family Programmable Logic Devices.It is recommended that the chip be packaged by Tray.Ensure its reliability by operating at 0°C~90°C TJ.It is recommended to mount the chip by Surface Mount.FPGAs belonging to the ispMACH® 4000B series contain this type of chip.With 128 pins programmed, the chip is ready to use.When using this device, YES is also available.You can find its related parts in the LC4128.If high efficiency is desired, the supply voltage should be kept at 2.5V.It is recommended that data be stored in EEPROM.In this case, it is mounted by Surface Mount.This device operates at a voltage of 2.7V when the maximum supply voltage is applied.With a minimal supply voltage of 2.3V, it operates.It is important to make sure that the maximum frequency is less than 333MHz.The status of input signals is determined by 4 dedicated inputs.An elementary building block consists of 8logic elements/cells.
LC4128B-27T128C Features
128-LQFP package
92 I/Os
The operating temperature of 0°C~90°C TJ
128 pin count
LC4128B-27T128C Applications
There are a lot of Lattice Semiconductor Corporation
LC4128B-27T128C CPLDs applications.
- Digital systems
- Portable digital devices
- Handheld digital devices
- Battery operated portable devices
- Complex programmable logic devices
- Digital designs
- Field programmable gate
- Address decoding
- D/T registers and latches
- Synchronous or asynchronous mode
