LC4064ZC-5TN100C Overview
Currently, there are 64 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.100-LQFPis the package in which it resides.There are 64 I/Os on the board.The termination of a device is set to [0].The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.The device is powered by a voltage of 1.8V volts.This part is part of the family [0].It is packaged in the way of Tray.To ensure its reliability, the operating temperature is set to [0].There should be a Surface Mounton the chip.In terms of FPGAs, it belongs to the ispMACH? 4000Z series.It has 100pins programmed.If this device is used, you will also be able to find [0].Its related parts can be found in the [0].Optimal efficiency requires a supply voltage of [0].For storing data, it is recommended to use [0].It is mounted by Surface Mount.There are 100 pins embedded in the device.This device operates at a voltage of 1.9V when the maximum supply voltage is applied.A minimum supply voltage of 1.7V is required for it to operate.4logic blocks/elements are present.A total of 484 Programmable I/Os are available.There can be 250MHz frequency achieved.Input signals are detected by 10dedicated inputs.There are 32 logic elements/cells on the device.
LC4064ZC-5TN100C Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~90°C TJ
100 pin count
100 pins
LC4064ZC-5TN100C Applications
There are a lot of Lattice Semiconductor Corporation LC4064ZC-5TN100C CPLDs applications.
- Address decoding
- Random logic replacement
- Software-Driven Hardware Configuration
- State machine design
- Power up sequencing
- Software-driven hardware configuration
- High speed graphics processing
- POWER-SAVING MODES
- Voltage level translation
- Dedicated input registers
