LC4064B-10TN48I Overview
This network has 64macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).It is embedded in the 48-LQFP package.The device has 32inputs and outputs.Terminations of devices are set to [0].QUADis the terminal position of this electrical part.The power source is powered by 2.5Vvolts.This part is in the family [0].It is recommended to package the chip by Tray.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].Chips should be mounted by Surface Mount.The FPGA belongs to the ispMACH? 4000B series.Chips are programmed with 48 pins.This device can also display [0].According to the LC4064, its related parts can be found.In order to achieve high efficiency, the supply voltage should be maintained at [0].In general, it is recommended to store data in [0].In this case, it is mounted by Surface Mount.There are 48 pins on the device.There is a maximum supply voltage of 2.7V.It is powered by 2.3Vas its minimum supply voltage.4logic elements/blocks exist.In total, there are 208programmable I/Os.Ideally, the maximal frequency should be lower than 400MHz Hz.Input signals are detected by 4dedicated inputs.
LC4064B-10TN48I Features
48-LQFP package
32 I/Os
The operating temperature of -40°C~105°C TJ
48 pin count
48 pins
LC4064B-10TN48I Applications
There are a lot of Lattice Semiconductor Corporation LC4064B-10TN48I CPLDs applications.
- INTERRUPT SYSTEM
- Software-Driven Hardware Configuration
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- PLC analog input modules
- ON-CHIP OSCILLATOR CIRCUIT
- TIMERS/COUNTERS
- DDC INTERFACE
- LED Lighting systems
- Bootloaders for FPGAs
- Wide Vin Industrial low power SMPS
