LC4032B-5T44I Overview
There are 32 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).In the 44-TQFPpackage, you will find it.It is equipped with 30I/O ports.There is a 44terminations set on devices.QUADis the terminal position of this electrical part.The power source is powered by 2.5Vvolts.There is a part in the family [0].It is recommended that the chip be packaged by Tray.Due to its reliability, it is operated at a temperature of [0].The chip should be mounted by Surface Mount.It is a type of FPGA belonging to the ispMACH? 4000B series.It has 44pins programmed.It is also characterized by YES.LC4032contains its related parts.800gates are devices that serve as building blocks for digital circuits.If high efficiency is to be achieved, the supply voltage should be maintained at [0].It is recommended that data be stored in [0].In this case, Surface Mountis used to mount the electronic component.There are 44pins on it.A maximum voltage of 2.7Vis required for operation.The device is designed to operate with a minimal supply voltage of 2.3VV.There are 2 logic elements/blocks.Currently, there are 100 Programmable I/Os available.There can be 227.27MHz frequency achieved.The input signals are detected by 2dedicated inputs.The fundamental building block consists of 36logic elements/cells.
LC4032B-5T44I Features
44-TQFP package
30 I/Os
The operating temperature of -40°C~105°C TJ
44 pin count
44 pins
LC4032B-5T44I Applications
There are a lot of Lattice Semiconductor Corporation LC4032B-5T44I CPLDs applications.
- Software-Driven Hardware Configuration
- Software Configuration of Add-In Boards
- Software-driven hardware configuration
- Voltage level translation
- Page register
- Preset swapping
- Power Meter SMPS
- DDC INTERFACE
- High speed graphics processing
- ROM patching
