GAL22V10D-25LPI Overview
In the mobile phone network, there are 10macro cells, which are cells with high-power antennas and towers.The item is enclosed in a 24-DIP (0.300, 7.62mm) package.In this case, there are 10 I/Os programmed.There is a 24terminations set on devices.This electrical component has a terminal position of 0.It is powered by a voltage of 5V volts.The part belongs to Programmable Logic Devices family.It is recommended that the chip be packaged by Bulk.Due to its reliability, it is operated at a temperature of [0].There should be a Through Holeon the chip.The FPGA belongs to the GAL?22V10 series.There are 24pins on the chip.Its related parts can be found in the [0].High efficiency requires the supply voltage to be maintained at [0].A Through Holeis mounted on this electronic component.There are 24 pins on the device.There is a maximum supply voltage of 5.5V.A minimum supply voltage of 4.5V is required for this device to operate.The system runs on a power supply of 5V watts.There is 38.5MHz frequency that can be achieved.There are 11 dedicated inputs used to detect the status of input signals.The output configuration is set to [0].A total of 132product terms are available on it.
GAL22V10D-25LPI Features
24-DIP (0.300, 7.62mm) package
10 I/Os
The operating temperature of -40°C~85°C TA
24 pin count
24 pins
5V power supplies
10 outputs
GAL22V10D-25LPI Applications
There are a lot of Lattice Semiconductor Corporation GAL22V10D-25LPI CPLDs applications.
- ON-CHIP OSCILLATOR CIRCUIT
- Software-driven hardware configuration
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Programmable polarity
- I2C BUS INTERFACE
- Parity generators
- Discrete logic functions
- Power up sequencing
- Multiple DIP Switch Replacement
- INTERRUPT SYSTEM
