GAL22V10D-10QP Overview
There are 10 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.It is contained in package [0].In this case, there are 10 I/Os programmed.Devices are programmed with terminations of [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.The power source is powered by 5Vvolts.There is a part in the family [0].Package the chip by Bulk.The temperature at which it operates is set to 0°C~75°C TAin order to ensure its reliability.Chips should be mounted by Through Hole.As part of the GAL?22V10series, it is a type of FPGA.It is equipped with 24 pin count.The GAL22V10indicates that related parts can be found.If high efficiency is desired, the supply voltage should be kept at [0].It is mounted by Through Hole.24pins are included in its design.With a maximum supply voltage of [0], it operates.With a minimal supply voltage of [0], it operates.A total of 5V power supplies are needed to run it.This can be achieved at a frequency of 125MHz.The status of input signals is detected by 11dedicated inputs.This device is configured with a 10 output.The product is equipped with 132terms.
GAL22V10D-10QP Features
24-DIP (0.300, 7.62mm) package
10 I/Os
The operating temperature of 0°C~75°C TA
24 pin count
24 pins
5V power supplies
10 outputs
GAL22V10D-10QP Applications
There are a lot of Lattice Semiconductor Corporation GAL22V10D-10QP CPLDs applications.
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- DMA control
- Auxiliary Power Supply Isolated and Non-isolated
- Address decoders
- STANDARD SERIAL INTERFACE UART
- Digital designs
- Digital systems
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Digital multiplexers
- Power up sequencing
