GAL18V10B-20LP Overview
In the mobile phone network, there are 10macro cells, which are cells with high-power antennas and towers.It is contained in package [0].As a result, it has 10 I/O ports programmed.The device is programmed with 20 terminations.This electrical part has a terminal position of DUALand is connected to the ground.It is powered by a voltage of 5V volts.It is included in Programmable Logic Devices.Tubeshould be used to package the chip.Due to its reliability, it is operated at a temperature of [0].Ideally, the chip should be mounted by Through Hole.It belongs to the GAL?18V10series of FPGAs.There are 20pins on the chip.It is also possible to find REGISTER PRELOAD; POWER-UP RESETwhen using this device.GAL18V10contains its related parts.Through Holeis the mounting point of this electronic part.It is designed with 20 pins.This device operates at a voltage of 5.25Vas its maximum supply voltage.Normally, it operates with a voltage of 4.75VV as its minimum supply voltage.A power supply of 5Vvolts is required to operate this device.You can achieve 62.5MHzfrequencies.To detect input signals, there are 7 dedicated inputs.The device is configured with an output of [0].In addition, it contains 96 product terms.
GAL18V10B-20LP Features
20-DIP (0.300, 7.62mm) package
10 I/Os
The operating temperature of 0°C~75°C TA
20 pin count
20 pins
5V power supplies
10 outputs
GAL18V10B-20LP Applications
There are a lot of Lattice Semiconductor Corporation GAL18V10B-20LP CPLDs applications.
- ROM patching
- Reset swapping
- INTERRUPT SYSTEM
- I/O PORTS (MCU MODULE)
- Parity generators
- Address decoders
- Field programmable gate
- TIMERS/COUNTERS
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Pattern recognition
