ISPLSI1048-80LQ Overview
Currently, there are 192 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.There are 96 I/Os on the board.Terminations of devices are set to 120.QUAD is the terminal position of this electrical part.A voltage of 5Vprovides power to the device.In this chip, the 120 pins are programmed.If you use this device, you will also find IN-SYSTEM PROGRAMMABLE; 4 EXTERNAL CLOCKS.For digital circuits, there are 8000 gates. These devices serve as building blocks.A power supply of 5V is required to operate it.In this case, the maximum supply voltage (Vsup) is 5.25V.The input signals are detected by 6 dedicated inputs.Vsup (supply voltage) must be greater than 4.75V.Ideally, its clock frequency should not exceed 50MHz.It is possible to classify programmable logic as EE PLD.It is recommended that the operating temperature be kept below 70°C.
ISPLSI1048-80LQ Features
96 I/Os
120 pin count
5V power supplies
ISPLSI1048-80LQ Applications
There are a lot of Lattice Semiconductor
ISPLSI1048-80LQ CPLDs applications.
- Bootloaders for FPGAs
- Address decoders
- Custom state machines
- Digital systems
- Portable digital devices
- Handheld digital devices
- Battery operated portable devices
- Complex programmable logic devices
- Digital designs
- Field programmable gate
