CS30-16IO1 Overview
Despite its direction, the RMS current (Irms) describes the average strength of the current.Keeping the RMS on-state current under 49 A is important for normal operation of the device.This device has a repetitive peak off-state voltage of 1600V, which is its maximum peak voltage across the device.Its maximal repetitive reverse voltage (Vrrm) is 1.6kV, meaning it can withstand the maximum amount of voltage in reverse-bias mode.Holding current (hypostatic) for electrical, electromagnetic, and electronic devices is the minimum current passing through a circuit in order for it to remain in an "ON" state.This thyristor has a forward voltage of 1.6V that is needed to cause current to flow across the diode.Insulation effectiveness can be measured by leakage current, with a maximal leakage current of 5mA.This device's DC gate trigger current-Max is 65 mA, which is what is required to switch the device from the blocked (Off) state to the unblocked (On) state.
CS30-16IO1 Features
its RMS current (Irms) is 49A
the repetitive peak off-state voltage of this device is 1600V
its current can be 100mA
this thyristors has 1.6V forward voltage
its maximal leakage current can be 5mA
CS30-16IO1 Applications
There are a lot of IXYS
CS30-16IO1 applications of SCRs thyristors.
- DC motor control and drives
- Battery charges
- Welders
- Power converters
- Lighting control
- Heat and temperature control
- Motor starters
- DC motor controls - AC motor controls
- Uninterruptable power supplies
- Wind mill
