IS45S32200E-7TLA1 Overview
There is a Volatile memory type associated with this device. Tray-cases are available. In the case of 86-TFSOP (0.400, 10.16mm Width), it is embedded within the case. There is an 64Mb 2M x 32 memory capacity on the chip. There is a mainstream memory format used by this device, which is called DRAM-format memory. Suitable for use in a wide range of demanding applications, this device offers an extended operating temperature range of -40°C~85°C TA. It is supplied votage within 3V~3.6V. As far as the mounting type is concerned, Surface Mount is recommended. It is planted on the chip with 86 terminations. In total, 1 functions are supported by this part. An 3.3V supply is required for this ic memory chip to operate properly. In this memory, the clock frequency rotation is within an 143MHz range. The memory device has an 86-pin package, which encloses it in a small package. I have noticed that the memory device has 86 pins, which indicates that it has 86 locations in the memory. There is a note stating that this memory chip operates at 3.3V. Memory chips configured with Surface Mount mounting achieve high efficiency and simplicity. It is rated for a nominal supply current of 140mA for this memory component. Despite all the merits of this chip, it also has AUTO/SELF REFRESH to boost system performance. The memory chip has 1 ports for granting read/write access to one memory address. As part of the design, the I/O port addresses are mapped into the memory using an COMMON-bit number.
IS45S32200E-7TLA1 Features
Package / Case: 86-TFSOP (0.400, 10.16mm Width)
86 Pins
Operating Supply Voltage:3.3V
Additional Feature:AUTO/SELF REFRESH
I/O Type: COMMON
IS45S32200E-7TLA1 Applications
There are a lot of ISSI, Integrated Silicon Solution Inc IS45S32200E-7TLA1 Memory applications.
- supercomputers
- graphics card
- networking
- hard disk drive (HDD)
- networks
- mainframes
- main computer memory
- printers
- telecommunications
- Camcorders
