IS42S16400J-7TL Overview
A Volatile-type memory can be classified as the memory type of this device. In addition, memory ics is available in a Tray case as well. Embedded in the 54-TSOP (0.400, 10.16mm Width) case, memory ics is a single file. 64Mb 4M x 16 is the chip's memory size. This device uses takes advantage of the DRAM format. Featuring an extended operating temperature range of 0°C~70°C TA, this device allows it to be used in a variety of demanding applications. A supply voltage of 3V~3.6V can be applied to it. It is recommended that the mounting type be Surface Mount. On the chip, there are 54 terminations. In total, 1 functions are supported by this part. In order to power this memory device, 3.3V will be necessary. With a clock frequency of 143MHz, the memory rotates on its own. A 54-pin package containing this memory device is used to house this device. The memory device has a total of 54 pins, thus indicating that it has a total of 54 memory locations. This memory chip has an operating supply voltage of 3.3V. The memory chip utilizes a straightforward, high-efficiency mounting method, Surface Mount mounting. As far as its nominal supply current is concerned, this memory component carries a rating of 90mA. This chip features all the merits of a conventional chip, but it also features AUTO/SELF REFRESH to improve system performance. This memory chip has 1 ports for accessing one memory address via read or write. In addition to this device, there are COMMON-bit memory mapped I/O port addresses on this device. The maximum current it can run at is 90mA.
IS42S16400J-7TL Features
Package / Case: 54-TSOP (0.400, 10.16mm Width)
54 Pins
Operating Supply Voltage:3.3V
Additional Feature:AUTO/SELF REFRESH
I/O Type: COMMON
IS42S16400J-7TL Applications
There are a lot of ISSI, Integrated Silicon Solution Inc IS42S16400J-7TL Memory applications.
- data buffer
- networking
- Cache memory
- cell phones
- embedded logic
- telecommunications
- networks
- hard disk drive (HDD)
- nonvolatile BIOS memory
- printers
