X1227V8Z Overview
There is an embedded version in the package TSSOP.Packaged as Bulk.The 8 termination is the practice of terminating a transmission line with a RTC module matched to its characteristic impedance.It is possible to see 5V voltage being supplied to this RTC real time clock.8 pins are attached to it.A part like this is included in Timer or RTC.In these RTC times, there is a memory of 512B where data and programs can be stored.There should be no more than 0.032MHz frequency in real time clocks' output.This RTC module has a mounting type of Surface Mount.A power supply of 5V is used to power it.In this system, there are 1 timers, which are real time clocks that output a signal at a preset time after an input signal is received.RTC time is recommended that the operating temperature be above 0°C.Lower than 70°C should be the operating temperature.When Vsup reaches 5.5V, the maximum supply voltage is reached.In this electrical real time analog clock, there is a uPs/uCs/Peripheral ICs type of TIMER, REAL TIME CLOCK.In order to operate normally, Vsup must remain above 4.5V.
X1227V8Z Features
TSSOP package
8 terminations
8 pin count
5V power supplies
X1227V8Z Applications
There are a lot of Intersil (Renesas Electronics America)
X1227V8Z Real Time Clocks applications.
- Automotive
- Industrial
- Digital still camera
- Digital video camera
- Printers
- Copy machines
- Mobile equipment
- Battery powered devices
- Printers and copiers
- Electronic metering
