ISL43210AIHZ-T Overview
The electronic part can be shipped overseas conveniently because it is packaged in SOT-23-6. In order to provide high reliability, an advanced packaging method Tape & Reel is used. In total, there are 6 terminations. There are 6 pins injected into the electronic part body. It has an internal resistance of 20Ohm. The functions of 6 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In normalcircumstances, users should not exceed 15V volts for the multiplexer. Single supply type digital switch with a low cost. 2.7V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 1.8μA. A digital multiplexer may suffer damage if voltage is applied above 1.8μA. There are SEPARATE OUTPUT outputs on this analog switch ic. During operation, the multiplexer should not be exposed to a temperature above 85°C.
ISL43210AIHZ-T Features
1.8μA Supply Current
ISL43210AIHZ-T Applications
There are a lot of Intersil (Renesas Electronics America)
ISL43210AIHZ-T Analog Switches & Multiplexers ICs applications.
- Isolation
- Medical
- Imaging
- Ultrasound
- Audio and video switching
- Automatic test equipment
- Precision data acquisition
- Battery-powered systems
- Sample-and-hold systems
- Communication systems
