ISL28194FHZ-T7 Overview
There is a SOT-23-6 case in which the instrumentation amplifier is packaged. Buffer amps of this type are called OPERATIONAL AMPLIFIER-types. A Cut Tape case is used to deliver the buffer op amp. The number of terminations is approaching the 6 mark. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. 6 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 2mV. It is possible to operate this buffer amplifier from a supply current of 330nA . There should be no change in the voltage gain. A linear amplifier like this has 1 circuits on it. In order for this buffer op amp to function, it should have a temperature of at least -40°C degrees Celsius. At temperatures greater than 125°C, op amp should not be used. The operating supply voltage of the buffer op amp is rated at 5V. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted. The electrical part is capable of being powered by a voltage of under 5.5V, which means that it can be used with any voltage supply. As a rule of thumb, the supply voltage of the op amp should not be lower than 1.8V.
ISL28194FHZ-T7 Features
supply voltage of 5V
115dB voltage gain
ISL28194FHZ-T7 Applications
There are a lot of Intersil (Renesas Electronics America)
ISL28194FHZ-T7 Instrumentational OP Amps applications.
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
