HI1-0201HS-2 Overview
As the electronic part is packed in CDIP, international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Bulk. Total terminations are 16. The electronic part provides high-quality output because it has 1 channels. Powered by a 15V voltage supply, the electrical part should be switched on and run. It is part of the design of the 16 series that this electronic component is included. An switch multiplexer with 50Ohm internal resistance has a value of 50Ohm. Datasheets for 16 pin functions are available upon request. The analogue multiplexer in this example is a typical Multiplexer or Switches. Multiplexers should not be powered above 36V in normal situations. The analog switch ic is of the Dual, Single supply type and is cost-effective. An operating current of 4.5mA would be sufficient for this switch device. When the digital multiplexer is charged above 10mA, damage can occur. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. 15V operating voltages can be used with this electrical part. Temperatures above 125°C degrees Celsius should not be operated by the multiplexer. It has a Drain to Source resistance of 30Ohm ohms. It conducts in a 4-bit manner.
HI1-0201HS-2 Features
1 Channels
4.5mA Supply Current
Drain-to-Source resistance: 30Ohm
4-Bit
HI1-0201HS-2 Applications
There are a lot of Intersil (Renesas Electronics America)
HI1-0201HS-2 Analog Switches & Multiplexers ICs applications.
- Imaging
- Ultrasound
- Audio and video switching
- Automatic test equipment
- Precision data acquisition
- Battery-powered systems
- Sample-and-hold systems
- Communication systems
- Data Acquisition Systems
- Relay Replacement
