HI1-0201-2 Overview
This electronic part is conveniently packaged in CDIP, making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Bulk. In total, there have been 16 terminations. A 1 channel electronic part produces high-quality output. A 15V voltage supply should turn on and run the electronic component. An injection of 16 pins is performed into the body of the electrical component. Analog switches have 55Ohm internal resistance. To find out what the 16 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Users should never supply a voltage higher than 44V to a switch device. Analog switch ics with Dual, Single supply type are cost-effective. There should be 5V voltage fed to the electrical part below 5V. It would be sufficient to run this analogue multiplexer with 500μA current. The switch multiplexer may be damaged if it is exposed to voltage greater than 2mA. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 22V. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. Temperatures higher than 125°C are not recommended for operation of the analogue multiplexer. Resistivity from Drain to Source is 55Ohm for this electronic part. It can conduct 4-bit signals.
HI1-0201-2 Features
1 Channels
500μA Supply Current
Drain-to-Source resistance: 55Ohm
4-Bit
HI1-0201-2 Applications
There are a lot of Intersil (Renesas Electronics America)
HI1-0201-2 Analog Switches & Multiplexers ICs applications.
- Ultrasound
- Audio and video switching
- Automatic test equipment
- Precision data acquisition
- Battery-powered systems
- Sample-and-hold systems
- Communication systems
- Data Acquisition Systems
- Relay Replacement
- Battery Powered Systems
