EL8302ISZ-T7 Overview
A SOIC case is used to package the op amp. The case in which buffer amplifier is delivered is called a Cut Tape case. It is estimated that there will be 16 terminations in the next few months. There are 16 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 800μV. An 5.6mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. There are 3 channels on the operational amplifiers. In order for op amp to function properly, the temperature should not be lower than -40°C degrees Celsius. Instrumentation amplifier should only be used at temperatures up to 85°C. The operating supply voltage of the buffer op amp is rated at 5V. I would like to point out that this electrical component is capable of working from a voltage below 5.5V as far as the power supply is concerned. As a general rule, it is advisable to keep the op amp's supply voltage above 3V at all times. Sorting based on consumer IC type can be done by using VIDEO AMPLIFIER.
EL8302ISZ-T7 Features
100dB voltage gain
EL8302ISZ-T7 Applications
There are a lot of Intersil (Renesas Electronics America)
EL8302ISZ-T7 Instrumentational OP Amps applications.
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
