EL5362IUZ-T7 Overview
In order to protect the op amps, a QSOP case is used. There are two types of operational amplifiers in this circuit. In the case of Cut Tape cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 16. It has 16 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 1.5mV. In order for this instrumentation amplifier to operate, the supply current needs to be between 1.5mA and 10 . Buffer op amp is equipped with 3 channels on the device. It is recommended that the temperature of this op amp ic should not fall below -40°C degrees Fahrenheit at any time. Linear amplifier shouldn't be used above 85°C degrees. The operating supply voltage of the buffer op amp is rated at 9V. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 12V. It is recommended that you keep the instrumentation amplifier's supply voltage higher than 5V when using it. It is recommended that you conduct this electronic part using the dual supply voltage of 6V. There is an 1.5mA quiescent current in linear amplifier.
EL5362IUZ-T7 Features
EL5362IUZ-T7 Applications
There are a lot of Intersil (Renesas Electronics America)
EL5362IUZ-T7 Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
