CS82C54-12Z Overview
There is a PLCC that comes with the timer clock, which is enclosed in the packaging. Frequency 12MHz is set on the programmable timer.It is used to pack in Bulk case. To mount this digital timer with Surface Mount. The operating supply voltage is rated at 10mA voltage. The minimum operating temperature of the chip must not be lower than 0°C. It's best to use the timer clock when the temperature is below 70°C. The timer clock contains 28 pins. The digital timer's operating supply voltage is rated 5V voltage. The supply voltage of the programmable timer can rate 5V. The sum of the IC chip pins is 28 . The number of the chip's terminations sums up to 28. The minimum supply voltage of the chip must not be lower than 4.5V. The supply voltage of this chip should not exceed 5.5V. The number of Timers/Counters on the device is 1.
CS82C54-12Z Features
Operate frequency at 12MHz
Package / Case: Bulk
Max Operating temperature at 0°C
1 Timers/Counters
CS82C54-12Z Applications
There are a lot of Intersil (Renesas Electronics America)
CS82C54-12Z Programmable Timers & Oscillators applications.
- Consumer Electronics
- Remote Sensors
- White Goods
- Electric Vehicles
- Always On Systems
- Clutch Actuator circuit
- Car Door Handle circuit
- Smart Key
- Remote current sensor
- Intruder Detection
