QS3VH253PAG Overview
Due to the fact that it is provided in the TSSOP, digital switch allows the board to be compacted.It is designed with 16 terminations as part of its basic configuration.For multiplexer's system, a voltage of 2.5V is supplied.This turn signal switch consists of 16 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.In this case, the supply type is Single.A configuration of 16 pins is used.The mounting point is Surface Mount.I would like to refer to the logic switch as a member of the CB3Q/3VH/3C/2B family.As a result, signal multiplexer provides a total of 8 bits.During mux switch's normal operation, 2.5/3.3V is provided with a power supply.Without external influences, it consumes 4mA current of multiplexer ic.A resistance of 2 is used to operate the signal switching.It is possible to accept voltage levels by using one of the 4 input lines of multiplexers.A signal source has 1 output lines.Signal switch operation at 85°C temperature is acceptable.It is recommended that the minimal operating temperature of the multiplexer be maintained at -40°C.Upon compliance with the applicable device specifications, the device will operate at the maximum supply voltage of 3.6V.Device specifications require that the minimum supply voltage is 2.3V.It uses the logic IC BUS EXCHANGER as its core logic unit.
QS3VH253PAG Features
Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
4 input lines
1 output lines
BUS EXCHANGER as the logic IC
QS3VH253PAG Applications
There are a lot of Integrated Device Technology (IDT)
QS3VH253PAG Signal Switches / Multiplexers / Decoders applications.
- D/A converters
- Implementing boolean functions with multiple variables
- Data collection system
- Audio transmission
- Video transmission
- Image transmission
- Recording transmission
- Combinational circuit
- Logic gates for other digital devices
- Signal router
