QS3VH125QG8 Overview
In order to conserve board space, digital switch is included in the QSOP.This configuration includes 16 terminations as part of its basic functionality.For multiplexer's system, 2.5V voltage is supplied.This turn signal switch has a total of 16 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.As a type of supply, Single is employed.Currently, it is configured with 16 pins.The multiplexer ic is mounted in the direction of Surface Mount.There is a family of CB3Q/3VH/3C/2B members.In this signal multiplexer, there are 4 bits provided.For mux switch's normal operation, there is a power supply provided at 3.3V.In electronic terms, the digital switch ic is classified as Bus Driver/Transceivers.No external influence consumes 3mA current of multiplexer ic.The resistance of the signal switching is 2.The system operates with a resistance of 9Ohm.The maximum operating temperature of 85°C is acceptable for this signal switch.Ideally, the temperature of the multiplexer should not exceed -40°C.In accordance with the applicable device specifications, the signal switches operates at a maximum supply voltage of 3.6V.Device specifications require that the digital swith operate at a minimum supply voltage of 2.3V.A logic IC based on BUS DRIVER is employed in this system.
QS3VH125QG8 Features
Supplied in the QSOP package
Adopting a supply type of Single
Power supplies of 3.3V
BUS DRIVER as the logic IC
QS3VH125QG8 Applications
There are a lot of Integrated Device Technology (IDT)
QS3VH125QG8 Signal Switches / Multiplexers / Decoders applications.
- Frequency multiplexing system
- A/D converters
- D/A converters
- Implementing boolean functions with multiple variables
- Data collection system
- Audio transmission
- Video transmission
- Image transmission
- Recording transmission
- Combinational circuit
