MC100ES6139DTR2 Overview
TSSOP case is available for the cut smart buffer. A total of 20 terminations have been found in it. The supply voltage of 3.3V is capable of providing high efficiency. On this board, there is a pin count of 20. There is a circuit clock contained within Clock Drivers that is responsible for this function. The electronic gadget belongs to the 100E family. This value is set to 3.8V for the maximum available supply voltage (Vsup). An IC with a value of LOW SKEW CLOCK DRIVER is used in order to achieve this. A voltage higher than 3.135V is necessary for normal operation of the system. There is a +-3/+-3.8V volt supply that powers the timeing clock. It is possible to have 4 true outputs. With the help of this gadget, it is also possible to obtain ECL MODE: VCC = 0V WITH VEE = -3.135V TO -3.8 V. For stable operation, the maximum operating temperature is 85°C°C. In order to maintain reliability, it has to be operated at a minimum temperature of -40°C degrees Celsius.
MC100ES6139DTR2 Features
20 terminations
Clock Drivers subcategory
logic IC type of LOW SKEW CLOCK DRIVER
MC100ES6139DTR2 Applications
There are a lot of Integrated Device Technology (IDT)
MC100ES6139DTR2 Clock Buffers & Drivers applications.
- Clock signal level shifting
- High performance communication system
- Data center
- Cloud computing
- Network
- High speed industry
- High-end consumer electronics
- Data communication
- Telecommunications
- Computing
