MC100ES6014EJ Overview
There is a case available for the cut smart buffer in TSSOP. For normal operation, 2GHz is the maximum value. It has 20 terminations in it, which means that it is terminated. Supply voltages of 2.5V are capable of achieving high efficiency. It has been positioned in the way of Surface Mount. There are 20 pins on the clock buffer. During operation, 20 pins are used. I have enclosed this circuit clock in Clock Drivers for your convenience. The clock switch operates at a minimum working temperature of -40°C in order to maintain reliability. It is possible to achieve stable operation by setting the maximum operating temperature to 85°C. The circuit uses a logic IC with a value of LOW SKEW CLOCK DRIVER as the input. The timeing clock is powered by a power supply of +-2.5/+-3.3V volts. A total of 5 outputs are available. A maximum supply voltage of 3.8VV can be applied to it. Depending on the type of source voltage, it can run with a voltage as low as 2.375V. By utilizing this gadget, one can also obtain ECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V.
MC100ES6014EJ Features
20 terminations
Clock Drivers subcategory
logic IC type of LOW SKEW CLOCK DRIVER
MC100ES6014EJ Applications
There are a lot of Integrated Device Technology (IDT)
MC100ES6014EJ Clock Buffers & Drivers applications.
- Clock signal format conversion
- Clock signal level shifting
- High performance communication system
- Data center
- Cloud computing
- Network
- High speed industry
- High-end consumer electronics
- Data communication
- Telecommunications
