IDT74LVC244AQ8 Overview
Buffer uses a neat QSOP package. This logic IC uses the Tape and Reel external packaging. All of the 2 elements are put into use. 20 terminations with different functions. It reuqires a supply voltage of 3.3V. This electronic component belongs to the LVC/LCX/Z family. 20 pins are set with the electrical part. It is suitable for Surface Mount applications. It has 20 pins. Enhanced with 2 ports. The network transceiver employs 4 bits for each element. In quiescent state, the electronic component uses 10μA. To run the part safely and stably in a circuit, 3.3V recommends users apply 3.3V on the lectronic component. It is capable of operating under a temperature as low as -40°C. It should operate at an ambient temperature no higher than 85°C. Logical driver outputs 24mA in its low-level output mode. In high-level output mode, the electronic component may conduct 24mA of current. The voltage used to run this electrical part should be 2.7V at least. In regard to the maximum supply voltage, it is rated 3.6V. It is known as a BUS DRIVER logic IC. It is sufficient to make 8 outputs. ENABLE LOW control technology starts up the logical driver.
IDT74LVC244AQ8 Features
High Level Output: 24mA
Low Level Output: 24mA
BUS DRIVER Logic IC
IDT74LVC244AQ8 Applications
There are a lot of Integrated Device Technology (IDT)
IDT74LVC244AQ8 Buffers & Transceivers applications.
- Cell phones
- Wireless modems
- Remote controls
- Wireless network systems
- Satellite communications networks
- Ethernet circuitry
- Wired telephone
- Cordless telephone
- Desktop PC
- Notebook
