IDT71V65703S80PFI Overview
A RAM, SRAM-type memory can be classified as the memory type of this device. Embedded in the LQFP case, memory ics is a single file. A total of 100 terminations have been planted on the chip. The comprehensive working procedure of this part involves 1 functions. In order to power this memory device, 3.3V will be necessary. A clock frequency rotation within 95MHz is used for the ic memory chip to rotate data. The memory device in question has 100 pins, thus indicating that it has 100 memory locations that can be accessed. This chip features all the merits of a conventional chip, but it also features FLOW-THROUGH ARCHITECTURE to improve system performance. As for power supplies, this memory chip requires just 3.3V . As part of the design, the I/O port addresses are mapped into the memory using an COMMON-bit number. There must not be a minimum operating temperature of less than -40°C for this device. A temperature of no more than 85°C centigrade is recommended for the component to be operated, otherwise, damage might be inflicted on the component. In order to operate your device, you will need to provide a maximum supply current of 0.06mA. Usually, this memory ics falls under the SRAMs component category.
IDT71V65703S80PFI Features
Package / Case: LQFP
Additional Feature:FLOW-THROUGH ARCHITECTURE
I/O Type: COMMON
IDT71V65703S80PFI Applications
There are a lot of Integrated Device Technology (IDT)
IDT71V65703S80PFI Memory applications.
- supercomputers
- telecommunications
- workstations,
- DVD disk buffer
- data buffer
- nonvolatile BIOS memory
- Camcorders
- embedded logic
- eDRAM
- graphics card
