IDT71V256SA12Y8 Overview
A RAM, SRAM - Asynchronous-type memory can be classified as the memory type of this device. In addition, memory ics is available in a Tape & Reel (TR) case as well. A total of 28 terminations have been planted on the chip. The comprehensive working procedure of this part involves 1 functions. In order to power this memory device, 3.3V will be necessary. A 28-pin package containing this memory device is used to house this device. The memory device in question has 28 pins, thus indicating that it has 28 memory locations that can be accessed. 1 ports allow read/write access to one memory address in this chip. As for power supplies, this memory chip requires just 3.3V . As part of the design, the I/O port addresses are mapped into the memory using an COMMON-bit number. There must not be a minimum operating temperature of less than 0°C for this device. A temperature of no more than 70°C centigrade is recommended for the component to be operated, otherwise, damage might be inflicted on the component. In order to operate your device, you will need to provide a maximum supply current of 0.09mA. Usually, this memory ics falls under the SRAMs component category.
IDT71V256SA12Y8 Features
28 Pins
I/O Type: COMMON
IDT71V256SA12Y8 Applications
There are a lot of Integrated Device Technology (IDT)
IDT71V256SA12Y8 Memory applications.
- supercomputers
- telecommunications
- workstations,
- DVD disk buffer
- data buffer
- nonvolatile BIOS memory
- Camcorders
- embedded logic
- eDRAM
- graphics card
