IDT71V016SA10PH Overview
A RAM, SRAM - Asynchronous-type memory can be classified as the memory type of this device. In addition, memory ics is available in a Rail/Tube case as well. Embedded in the TSOP case, memory ics is a single file. A total of 44 terminations have been planted on the chip. The comprehensive working procedure of this part involves 1 functions. In order to power this memory device, 3.3V will be necessary. A 44-pin package containing this memory device is used to house this device. The memory device in question has 44 pins, thus indicating that it has 44 memory locations that can be accessed. There is a note indicating that this memory chip operates at an 3.3V volt supply voltage. The memory chip utilizes a straightforward, high-efficiency mounting method, Surface Mount mounting. There is a nominal supply current rating of 160mA for this memory component. 1 ports allow read/write access to one memory address in this chip. As part of the design, the I/O port addresses are mapped into the memory using an COMMON-bit number. There must not be a minimum operating temperature of less than 0°C for this device. A temperature of no more than 70°C centigrade is recommended for the component to be operated, otherwise, damage might be inflicted on the component. Usually, this memory ics falls under the SRAMs component category. Ideally, this part should be supplied with a voltage of at least 3.15V. An operating voltage of no more than 3.6V is required.
IDT71V016SA10PH Features
Package / Case: TSOP
44 Pins
Operating Supply Voltage:3.3V
I/O Type: COMMON
IDT71V016SA10PH Applications
There are a lot of Integrated Device Technology (IDT)
IDT71V016SA10PH Memory applications.
- supercomputers
- telecommunications
- workstations,
- DVD disk buffer
- data buffer
- nonvolatile BIOS memory
- Camcorders
- embedded logic
- eDRAM
- graphics card
