IDT71T75802S100PFI Overview
A RAM, SRAM-type memory can be classified as the memory type of this device. Embedded in the LQFP case, memory ics is a single file. A total of 100 terminations have been planted on the chip. The comprehensive working procedure of this part involves 1 functions. In order to power this memory device, 2.5V will be necessary. The memory device in question has 100 pins, thus indicating that it has 100 memory locations that can be accessed. This chip features all the merits of a conventional chip, but it also features PIPELINED ARCHITECTURE to improve system performance. As for power supplies, this memory chip requires just 2.5V . As part of the design, the I/O port addresses are mapped into the memory using an COMMON-bit number. There must not be a minimum operating temperature of less than -40°C for this device. A temperature of no more than 85°C centigrade is recommended for the component to be operated, otherwise, damage might be inflicted on the component. In order to operate your device, you will need to provide a maximum supply current of 0.195mA. Usually, this memory ics falls under the SRAMs component category. A frequency of 100MHz is used to process the data on this memory chip.
IDT71T75802S100PFI Features
Package / Case: LQFP
Additional Feature:PIPELINED ARCHITECTURE
I/O Type: COMMON
Freguency at 100MHz
100MHz terminals
IDT71T75802S100PFI Applications
There are a lot of Integrated Device Technology (IDT)
IDT71T75802S100PFI Memory applications.
- supercomputers
- telecommunications
- workstations,
- DVD disk buffer
- data buffer
- nonvolatile BIOS memory
- Camcorders
- embedded logic
- eDRAM
- graphics card
