Name: IDT71T016SA15PH
Brand: Integrated Device Technology (IDT)
SKU: IDT71T016SA15PH
Availability: InStock

new-10%

IDT71T016SA15PH

Manufacturer part number:IDT71T016SA15PH

Manufacturer:Integrated Device Technology (IDT)

Description:2.5V V 44 Pin Memory IC 18.41mm mm

Case Package:SOT-23

Datasheet:IDT71T016SA15PH Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Package / Case	TSOP
Surface Mount	YES
Published	2008
JESD-609 Code	e0
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	44
ECCN Code	3A991.B.2.B
Terminal Finish	Tin/Lead (Sn85Pb15)
Max Operating Temperature	70°C
Min Operating Temperature	0°C
HTS Code	8542.32.00.41
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	225
Number of Functions	1
Supply Voltage	2.5V
Terminal Pitch	0.8mm
Reach Compliance Code	not_compliant
Time@Peak Reflow Temperature-Max (s)	20
Pin Count	44
JESD-30 Code	R-PDSO-G44
Qualification Status	Not Qualified
Supply Voltage-Max (Vsup)	2.625V
Power Supplies	2.5V
Temperature Grade	COMMERCIAL
Supply Voltage-Min (Vsup)	2.375V
Interface	Parallel
Memory Type	RAM, SRAM - Asynchronous
Supply Current-Max	0.13mA
Organization	64KX16
Output Characteristics	3-STATE
Memory Width	16
Standby Current-Max	0.015A
Memory Density	1048576 bit
Access Time (Max)	15 ns
I/O Type	COMMON
Standby Voltage-Min	2.38V
Length	18.41mm
Height Seated (Max)	1.2mm
Width	10.16mm
RoHS Status	Non-RoHS Compliant

IDT71T016SA15PH Product Details

IDT71T016SA15PH Overview

RAM, SRAM - Asynchronous is the type of memory it has. The TSOP case contains it. The chip has 44 terminations. For a comprehensive working procedure, this part supports as many as 1 functions. In order to operate this memory device, it must be supplied with 2.5V of power. There are 44 pins on this memory device, which indicates it has 44 memory locations in it. When it comes to power supplies, this memory chip only requires 2.5V . I/O port addresses on this device are mapped to memory addresses of COMMON bits. This device must operate at a minimum temperature of 0°C. Temperatures no higher than 70°C degrees Celsius are recommended for operation. A maximum supply current of 0.13mA can be used to operate this device.