Name: IDT71P72804S200BQ
Brand: Integrated Device Technology (IDT)
SKU: IDT71P72804S200BQ
Availability: InStock

new-10%

IDT71P72804S200BQ

Manufacturer part number:IDT71P72804S200BQ

Manufacturer:Integrated Device Technology (IDT)

Description:1.5/1.81.8V V 165 Pin Memory IC 15mm mm

Case Package:SOT-23

Datasheet:IDT71P72804S200BQ Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Surface Mount	YES
Number of Pins	165
Published	2006
JESD-609 Code	e0
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	165
ECCN Code	3A991.B.2.A
Terminal Finish	Tin/Lead (Sn63Pb37)
Max Operating Temperature	70°C
Min Operating Temperature	0°C
HTS Code	8542.32.00.41
Subcategory	SRAMs
Technology	CMOS
Terminal Position	BOTTOM
Terminal Form	BALL
Peak Reflow Temperature (Cel)	225
Number of Functions	1
Supply Voltage	1.8V
Terminal Pitch	1mm
Reach Compliance Code	not_compliant
Frequency	200MHz
Time@Peak Reflow Temperature-Max (s)	20
Pin Count	165
Qualification Status	Not Qualified
Supply Voltage-Max (Vsup)	1.9V
Power Supplies	1.5/1.81.8V
Temperature Grade	COMMERCIAL
Supply Voltage-Min (Vsup)	1.7V
Interface	Parallel
Memory Type	QDR, RAM, SRAM
Operating Mode	SYNCHRONOUS
Organization	1MX18
Output Characteristics	3-STATE
Memory Width	18
Memory Density	18874368 bit
Access Time (Max)	0.45 ns
I/O Type	SEPARATE
Standby Voltage-Min	1.7V
Length	15mm
Height Seated (Max)	1.2mm
Width	13mm
RoHS Status	Non-RoHS Compliant

IDT71P72804S200BQ Product Details

IDT71P72804S200BQ Overview

QDR, RAM, SRAM is the type of memory it has. The chip has 165 terminations. For a comprehensive working procedure, this part supports as many as 1 functions. In order to operate this memory device, it must be supplied with 1.8V of power. The memory device is enclosed in a package with an 165-pin connector. There are 165 pins on this memory device, which indicates it has 165 memory locations in it. When it comes to power supplies, this memory chip only requires 1.5/1.81.8V . I/O port addresses on this device are mapped to memory addresses of SEPARATE bits. This device must operate at a minimum temperature of 0°C. Temperatures no higher than 70°C degrees Celsius are recommended for operation. It is usually considered a type of SRAMs component. Data is processed by this memory ics at a frequency of 200MHz.