IDT71256SA15Y Overview
There is a memory type RAM, SRAM - Asynchronous for this type of device. The chip contains 28 terminations. As many as 1 functions are supported for comprehensive working. An 5V supply is required for this ic memory chip to operate properly. A package of 28 pins is used to protect this memory device. The memory device has 28 pins, which means that it has 28 memory locations, which indicates it is an 28-bit device. This memory runs on an 5V operating supply voltage. Memory chips configured with Surface Mount mounting achieve high efficiency and simplicity. The nominal supply current of this memory component is 150mA. Each memory address is accessed by one of 1 ports on this chip. The power supply needed for this memory chip is only 5V . An COMMON-bit memory mapped I/O port address is used to address this device. There must be at least an 0°C operating temperature for this device. The part should not be operated at temperatures above 70°C degrees Celsius as otherwise, the part may be damaged due to the excessive amount of heat. This part should have a minimum supply voltage of 4.5V. A maximum voltage of 5.5V shall be allowed for its operating voltage.
IDT71256SA15Y Features
28 Pins
Operating Supply Voltage:5V
I/O Type: COMMON
IDT71256SA15Y Applications
There are a lot of Integrated Device Technology (IDT)
IDT71256SA15Y Memory applications.
- personal computers
- servers
- supercomputers
- telecommunications
- workstations,
- DVD disk buffer
- data buffer
- nonvolatile BIOS memory
- Camcorders
- embedded logic
