IDT6116SA45TP Overview
There is a memory type RAM, SRAM - Asynchronous for this type of device. The case comes in the Rail/Tube style. The file is embedded in a PDIP case. The chip contains 24 terminations. As many as 1 functions are supported for comprehensive working. An 5V supply is required for this ic memory chip to operate properly. A package of 24 pins is used to protect this memory device. The memory device has 24 pins, which means that it has 24 memory locations, which indicates it is an 24-bit device. This memory runs on an 5V operating supply voltage. Memory chips configured with Through Hole mounting achieve high efficiency and simplicity. The nominal supply current of this memory component is 100mA. Each memory address is accessed by one of 1 ports on this chip. The power supply needed for this memory chip is only 5V . An COMMON-bit memory mapped I/O port address is used to address this device. There must be at least an 0°C operating temperature for this device. The part should not be operated at temperatures above 70°C degrees Celsius as otherwise, the part may be damaged due to the excessive amount of heat. The component is usually referred to as a type of SRAMs. This part should have a minimum supply voltage of 4.5V. A maximum voltage of 5.5V shall be allowed for its operating voltage.
IDT6116SA45TP Features
Package / Case: PDIP
24 Pins
Operating Supply Voltage:5V
I/O Type: COMMON
IDT6116SA45TP Applications
There are a lot of Integrated Device Technology (IDT)
IDT6116SA45TP Memory applications.
- personal computers
- servers
- supercomputers
- telecommunications
- workstations,
- DVD disk buffer
- data buffer
- nonvolatile BIOS memory
- Camcorders
- embedded logic
