IDT23S05E1DCGI Overview
This clock generator ic can sustain 260 degrees of temperature during reflowing. There are 8 terminations found in this file. To operate this time clock generator, 3.3V voltage should be applied. 3.6V would be the maximum supply voltage for this clock generator. In order to maintain safety, this frequency generator should be supplied with voltages above 3V. In addition, the PLL may cause ha85°Cards once the temperature is set higher than 85°C. A clock PLL that starts up at a lower temperature may not function. It is a 8-bit clock PLL designed specifically for microprocessors. In general, this clock PLL is considered a Clock Drivers device. Low timing skew is offered by this RF synthesizer at maximum 0.25 ns. The digital clock generator has 4 high-enable output pins. By searching for parts that belong to the 23S family, you can find electronic parts that are similar. PLL BASED CLOCK DRIVER logic circuits are primarily constructed using this time clock generator. Physical input clock PLLs can be used to make control signals using the STANDARD input conditioning feature.
IDT23S05E1DCGI Features
Supply voltage of 3.3V
4 true outputs
IDT23S05E1DCGI Applications
There are a lot of Integrated Device Technology (IDT)
IDT23S05E1DCGI Clock Generators applications.
- Wireless base station for LTE, LTE-advanced
- Picocells, femtocells and small cells
- Sampling clocks for ADC and DAC
- 1 Gigabit Ethernet
- 10 Gigabit Ethernet
- FPGA and processor clocks
- Line cards used in telephone exchange
- Fiber Channel
- PCI express cards
- Infotainment systems
