Welcome to Hotenda.com Online Store!

logo
userjoin
Home

ICS570ALF

ICS570ALF

ICS570ALF

Integrated Device Technology (IDT)

5V Clock Generators 8 Pins 8 Terminals

SOT-23

ICS570ALF Datasheet PDF

non-compliant

Technical Specifications

Parameter NameValue
TypeParameter
Surface MountYES
Published 1999
JESD-609 Code e3
Pbfree Code yes
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
Terminal Finish Matte Tin (Sn) - annealed
HTS Code8542.39.00.01
Subcategory Clock Drivers
Technology CMOS
Terminal Position DUAL
Terminal FormGULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch1.27mm
Time@Peak Reflow Temperature-Max (s) 30
Pin Count8
JESD-30 Code R-PDSO-G8
Qualification StatusNot Qualified
Operating Temperature (Max) 70°C
Supply Voltage-Max (Vsup) 5.25V
Power Supplies3.3V
Temperature GradeCOMMERCIAL
Supply Voltage-Min (Vsup) 4.75V
Family 570
Logic IC Type PLL BASED CLOCK DRIVER
Max I(ol) 0.012 A
fmax-Min 168 MHz
Same Edge Skew-Max (tskwd) 0.2 ns
Number of True Outputs 2
Input Conditioning STANDARD
Length 4.9mm
Height Seated (Max) 1.75mm
Width 3.9mm
RoHS StatusRoHS Compliant
In-Stock:4731 items

ICS570ALF Product Details

ICS570ALF Overview


This clock generator ic can sustain 260 degrees of temperature during reflowing. There are 8 terminations found in this file. To operate this time clock generator, 5V voltage should be applied. 5.25V would be the maximum supply voltage for this clock generator. In order to maintain safety, this frequency generator should be supplied with voltages above 4.75V. In addition, the PLL may cause ha70°Cards once the temperature is set higher than 70°C. It is a 8-bit clock PLL designed specifically for microprocessors. In general, this clock PLL is considered a Clock Drivers device. Low timing skew is offered by this RF synthesizer at maximum 0.2 ns. The digital clock generator has 2 high-enable output pins. By searching for parts that belong to the 570 family, you can find electronic parts that are similar. PLL BASED CLOCK DRIVER logic circuits are primarily constructed using this time clock generator. Physical input clock PLLs can be used to make control signals using the STANDARD input conditioning feature.

ICS570ALF Features


Supply voltage of 5V
2 true outputs


ICS570ALF Applications


There are a lot of Integrated Device Technology (IDT)
ICS570ALF Clock Generators applications.


  • Wireless base station for LTE, LTE-advanced
  • Picocells, femtocells and small cells
  • Sampling clocks for ADC and DAC
  • 1 Gigabit Ethernet
  • 10 Gigabit Ethernet
  • FPGA and processor clocks
  • Line cards used in telephone exchange
  • Fiber Channel
  • PCI express cards
  • Infotainment systems

Get Subscriber

Enter Your Email Address, Get the Latest News