9DBV0831AKLF Overview
A QFN-serial number is attached to the packaging of this product, which is packaged in a case. Clock program has 48 terminations. Parts with 1.8V voltage are provided by the part. Run 260 using the peak reflow temperature of this part. A device with 1 has been detected. normaloperation is restricted to 137.5MHz frequency. 2006 parts of this part have been published. The Surface Mount mount is recommended. 48 pins are present on the device. There are 48 pins 48 this board. Temperatures below 0°C cannot be used for this device. Circuits application is recommended to operate at a temperature lower than 70°C. There are a number of devices within the Clock Drivers family. In this case, it is possible for the device to maintain 8 outputs. As far as supply voltage is concerned, this part is used at 1.9V. For the device to maintain a supply voltage above 1.7V. You can search for parts associated with the 9DBV family based on the part number. This device uses a type PLL BASED CLOCK DRIVER logic IC.
9DBV0831AKLF Features
Peak Reflow Temperature (Cel): 260
Include 1 Circuits
with 48 Pins
Logic IC Type: PLL BASED CLOCK DRIVER
9DBV0831AKLF Applications
There are a lot of Integrated Device Technology (IDT)
9DBV0831AKLF application specific timer applications.
- Broadcast video/audio timing
- Processor and FPGA clocking
- Any-frequency clock conversion
- MSAN/DSLAM/PON
- Fibre Channel, SAN
- Telecom line cards
- 1 GbE and 10 GbE
- Servers, Storage, Search Acceleration
- Ethernet Switches, Routers
- Small Cells, Mobile Backhaul/Fronthaul
