97ULP845AHLF Overview
The Tray package provides access to it. An accompanying case is included. A mounting type of Surface Mount is recommended. There are 28 terminations in it. The part provides a voltage of 1.8V volts. The peak reflow temperature is used to run 260. Temperatures can be varied in the 0°C ~ 70°C range. Depending on the component, a voltage of 1.8V can be supplied. This component primarily serves the purpose of --. The output should be --. Currently, there are 2013 publications of the part. In order to find information about a part, you need to start at ICS97ULP845. The Surface Mount mounting method is recommended. There are 28 pins on this device. The board has 28 pins. The minimum working temperature of this device cannot be lower than 0°C. There should be a temperature below 70°C during operation. The series number of a part is --. The company employs 28-CABGA (4.0x4.5) as its supplier device package in order to manufacture its devices.
97ULP845AHLF Features
Mounting Type: Surface Mount
Peak Reflow Temperature (Cel): 260
run the output at th range of --
with 28 Pins
97ULP845AHLF Applications
There are a lot of Integrated Device Technology (IDT)
97ULP845AHLF application specific timer applications.
- Ethernet switch/router
- PCI Express 2.0/3.0
- Broadcast video/audio timing
- Processor and FPGA clocking
- Any-frequency clock conversion
- MSAN/DSLAM/PON
- Fibre Channel, SAN
- Telecom line cards
- 1 GbE and 10 GbE
- Servers, Storage, Search Acceleration
