71V67603S150BGGI8 Overview
In this case, the memory type of the device can be classified as RAM, SDR, SRAM. An embedded BGA case surrounds memory ics. It is estimated that the memory size on the chip is 1.1MB. It is planted on the chip with 119 terminations. It supports up to 1 functions for comprehensive operation. There is a requirement for 3.3V to be supplied to this ic memory chip in order to operate. The ic memory chip comes in a package with 119 pins that allows it to be connected to a computer. The memory device has a total of 119 pins, thus indicating that it has a total of 119 memory locations. It is noted that the operating supply voltage of this memory is 3.3V. This chip is not only loaded with advantages, but it also comes with PIPELINED ARCHITECTURE, which boosts the performance of your system. Several ports on this chip are used to access one memory address for reading and writing. I/O port addresses in this device are mapped to COMMON bits from the device's memory. In order for this device to function properly, its operating temperature must not be less than -40°C. The temperature should not exceed 85°C degrees Celsius. SRAMs components are usually considered types of this component. This memory ics should not be operated with a voltage below 3.135V volts at the minimum. There shall be a voltage limit of 3.465V for its operation. Using this memory chip, you will be able to process data at a speed of 150MHz times per second. An 325mA volt maximum current is required to run it. This Memory chip is capable of 150MHz max frequency.
71V67603S150BGGI8 Features
Package / Case: BGA
119 Pins
Operating Supply Voltage:3.3V
Additional Feature:PIPELINED ARCHITECTURE
I/O Type: COMMON
Freguency at 150MHz
150MHz terminals
71V67603S150BGGI8 Applications
There are a lot of Integrated Device Technology (IDT)
71V67603S150BGGI8 Memory applications.
- networking
- personal computers
- servers
- supercomputers
- telecommunications
- workstations,
- DVD disk buffer
- data buffer
- nonvolatile BIOS memory
- Camcorders
