71V67603S133BGGI Overview
There is a memory type RAM, SDR, SRAM for this type of device. The file is embedded in a BGA case. This chip has an 1.1MB size of memory on it, so a lot of data can be stored on it. The chip contains 119 terminations. As many as 1 functions are supported for comprehensive working. An 3.3V supply is required for this ic memory chip to operate properly. A package of 119 pins is used to protect this memory device. The memory device has 119 pins, which means that it has 119 memory locations, which indicates it is an 119-bit device. This memory runs on an 3.3V operating supply voltage. Although it has all the merits this chip has, it is also equipped with PIPELINED ARCHITECTURE to give a performance boost to the system. Each memory address is accessed by one of 1 ports on this chip. An COMMON-bit memory mapped I/O port address is used to address this device. There must be at least an -40°C operating temperature for this device. The part should not be operated at temperatures above 85°C degrees Celsius as otherwise, the part may be damaged due to the excessive amount of heat. The component is usually referred to as a type of SRAMs. This part should have a minimum supply voltage of 3.135V. A maximum voltage of 3.465V shall be allowed for its operating voltage. As a result of the frequency of this memory chip, data can be processed at a rate of 133MHz. In order for ic memory chip to run, it needs a maximum current of 280mA . This Memory chip operates at a maximum frequency of 133MHz.
71V67603S133BGGI Features
Package / Case: BGA
119 Pins
Operating Supply Voltage:3.3V
Additional Feature:PIPELINED ARCHITECTURE
I/O Type: COMMON
Freguency at 133MHz
133MHz terminals
71V67603S133BGGI Applications
There are a lot of Integrated Device Technology (IDT)
71V67603S133BGGI Memory applications.
- personal computers
- servers
- supercomputers
- telecommunications
- workstations,
- DVD disk buffer
- data buffer
- nonvolatile BIOS memory
- Camcorders
- embedded logic
