Welcome to Hotenda.com Online Store!

logo
userjoin
Home

71V65603S100PFG8

71V65603S100PFG8

71V65603S100PFG8

Integrated Device Technology (IDT)

Surface Mount 100 Pin Memory IC 9 Mb kb 20mm mm 250mA mA 36b b

SOT-23

71V65603S100PFG8 Datasheet PDF

non-compliant

Technical Specifications

Parameter NameValue
TypeParameter
Factory Lead Time 8 Weeks
Mount Surface Mount
Package / Case TQFP
Number of Pins 100
PackagingTape & Reel
Published 2007
JESD-609 Code e3
Pbfree Code yes
Part StatusActive
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 100
Terminal Finish Matte Tin (Sn) - annealed
Max Operating Temperature70°C
Min Operating Temperature 0°C
Additional FeaturePIPELINED ARCHITECTURE
Subcategory SRAMs
Technology CMOS
Terminal Position QUAD
Terminal FormGULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch0.65mm
Frequency 100MHz
Time@Peak Reflow Temperature-Max (s) 30
Pin Count100
Operating Supply Voltage3.3V
Temperature GradeCOMMERCIAL
Interface Parallel
Max Supply Voltage3.465V
Min Supply Voltage3.135V
Memory Size1.1MB
Number of Ports1
Nominal Supply Current250mA
Memory TypeRAM, SDR, SRAM
Frequency (Max) 100MHz
Access Time 10 ns
Organization 256KX36
Output Characteristics 3-STATE
Address Bus Width18b
Density 9 Mb
Standby Current-Max 0.04A
I/O Type COMMON
Sync/Async Synchronous
Word Size36b
Length 20mm
Width 14mm
Thickness 1.4mm
Radiation HardeningNo
RoHS StatusRoHS Compliant
Lead Free Lead Free
In-Stock:920 items

Pricing & Ordering

QuantityUnit PriceExt. Price

71V65603S100PFG8 Product Details

71V65603S100PFG8 Overview


A RAM, SDR, SRAM-type memory can be classified as the memory type of this device. In addition, memory ics is available in a Tape & Reel case as well. Embedded in the TQFP case, memory ics is a single file. On the chip, there is an 1.1MB memory, which is the size of the chip's memory. A total of 100 terminations have been planted on the chip. The comprehensive working procedure of this part involves 1 functions. In order to power this memory device, 3.3V will be necessary. A 100-pin package containing this memory device is used to house this device. The memory device in question has 100 pins, thus indicating that it has 100 memory locations that can be accessed. There is a note indicating that this memory chip operates at an 3.3V volt supply voltage. The memory chip utilizes a straightforward, high-efficiency mounting method, Surface Mount mounting. There is a nominal supply current rating of 250mA for this memory component. This chip features all the merits of a conventional chip, but it also features PIPELINED ARCHITECTURE to improve system performance. 1 ports allow read/write access to one memory address in this chip. As part of the design, the I/O port addresses are mapped into the memory using an COMMON-bit number. There must not be a minimum operating temperature of less than 0°C for this device. A temperature of no more than 70°C centigrade is recommended for the component to be operated, otherwise, damage might be inflicted on the component. Usually, this memory ics falls under the SRAMs component category. Ideally, this part should be supplied with a voltage of at least 3.135V. An operating voltage of no more than 3.465V is required. A frequency of 100MHz is used to process the data on this memory chip. A ic memory chip with this frequency has a maximum speed of 100MHz.

71V65603S100PFG8 Features


Package / Case: TQFP
100 Pins
Operating Supply Voltage:3.3V
Additional Feature:PIPELINED ARCHITECTURE
I/O Type: COMMON
Freguency at 100MHz
100MHz terminals


71V65603S100PFG8 Applications


There are a lot of Integrated Device Technology (IDT)
71V65603S100PFG8 Memory applications.


  • supercomputers
  • telecommunications
  • workstations,
  • DVD disk buffer
  • data buffer
  • nonvolatile BIOS memory
  • Camcorders
  • embedded logic
  • eDRAM
  • graphics card

Get Subscriber

Enter Your Email Address, Get the Latest News