Welcome to Hotenda.com Online Store!

logo
userjoin
Home

71V432S6PFGI8

71V432S6PFGI8

71V432S6PFGI8

Integrated Device Technology (IDT)

Surface Mount 100 Pin Memory IC 1 Mb kb 20mm mm 180mA mA 32b b

SOT-23

71V432S6PFGI8 Datasheet PDF

non-compliant

Technical Specifications

Parameter NameValue
TypeParameter
Mount Surface Mount
Package / Case TQFP
Number of Pins 100
PackagingTape & Reel
Published 2013
JESD-609 Code e3
Pbfree Code yes
Part StatusDiscontinued
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 100
Terminal Finish Matte Tin (Sn) - annealed
Max Operating Temperature85°C
Min Operating Temperature -40°C
Additional FeaturePIPELINED ARCHITECTURE
Subcategory SRAMs
Technology CMOS
Terminal Position QUAD
Terminal FormGULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch0.635mm
Frequency 83MHz
Time@Peak Reflow Temperature-Max (s) 30
Pin Count100
Operating Supply Voltage3.3V
Temperature GradeINDUSTRIAL
Interface Parallel
Max Supply Voltage3.63V
Min Supply Voltage3.135V
Memory Size128kB
Number of Ports1
Nominal Supply Current180mA
Memory TypeRAM, SDR, SRAM
Frequency (Max) 83MHz
Access Time 6 ns
Organization 32KX32
Output Characteristics 3-STATE
Address Bus Width15b
Density 1 Mb
I/O Type COMMON
Sync/Async Synchronous
Word Size32b
Length 20mm
Width 14mm
Thickness 1.4mm
Radiation HardeningNo
RoHS StatusRoHS Compliant
Lead Free Lead Free
In-Stock:2955 items

71V432S6PFGI8 Product Details

71V432S6PFGI8 Overview


As far as its memory type goes, it falls into the RAM, SDR, SRAM category. You can get memory ics in a Tape & Reel case. TQFP case encloses it. There is 128kB of memory on the chip. There are 100 terminations on the chip. There are 1 functions supported by this part as part of the comprehensive working process. The memory device is designed to be supplied with an 3.3V volt power supply in order to operate properly. In this ic memory chip, there is an 100-pin package that encloses the device. It is worth noting that this memory device has 100 pins, which indicates it has 100 memory locations. This memory chip has an operating supply voltage of 3.3V. As a result of the Surface Mount mounting configuration, this chip is designed to be straightforward, high-efficiency, and easy to install. As far as the nominal supply current of this memory component is concerned, it is rated at 180mA. Despite all its benefits, this memory chip also offers PIPELINED ARCHITECTURE for improved system performance. Using 1 ports, a single memory address can be read and/or written. A memory map of COMMON bits has been added to the I/O port addresses of this device. Memory ics must operate at a temperature of at least -40°C. Temperatures over 85°C°C are not recommended. There is a common misconception that this component is a type of SRAMs. If this part is to be used, the minimum supply voltage should not be less than 3.135V volts. The operating voltage of the memory ics shall not exceed 3.63V. There is an 83MHz frequency with which this memory chip processes data. In this Memory chip, the maximum frequency is 83MHz.

71V432S6PFGI8 Features


Package / Case: TQFP
100 Pins
Operating Supply Voltage:3.3V
Additional Feature:PIPELINED ARCHITECTURE
I/O Type: COMMON
Freguency at 83MHz
83MHz terminals


71V432S6PFGI8 Applications


There are a lot of Integrated Device Technology (IDT)
71V432S6PFGI8 Memory applications.


  • multimedia computers
  • networking
  • personal computers
  • servers
  • supercomputers
  • telecommunications
  • workstations,
  • DVD disk buffer
  • data buffer
  • nonvolatile BIOS memory

Get Subscriber

Enter Your Email Address, Get the Latest News