71V416L10YG Overview
RAM, SDR, SRAM - Asynchronous is its memory type. There is an 512kB memory capacity on the chip. As you can see from the diagram, the chip is planted with 44 terminations. In total, 1 functions are supported by this part. The memory device designed for this application has been designed to be powered by an 3.3V power supply. It is encased in an 44-pin package that contains this ic memory chip. It has 44 pins indicating it has 44 memory locations. It is noted that the operating supply voltage of this memory is 3.3V. Chips such as this one are mounted using Surface Mount mounting, a straightforward method of mounting that is effective. Memory chip's nominal supply current is 180mA. An address can be read and/or written to one memory address using 1 ports on the chip. In addition to this device, there are COMMON-bit memory mapped I/O port addresses on this device. A minimum operating temperature of 0°C must be met by this device. As a general rule, memory ics is recommended that the product be operated at temperatures no higher than 70°Cc, otherwise, damage could be done to it. Generally, this component is considered a type of SRAMs. This memory ics requires a minimum voltage of 3V. In order for it to operate properly, its voltage should not exceed 3.6V.
71V416L10YG Features
44 Pins
Operating Supply Voltage:3.3V
I/O Type: COMMON
71V416L10YG Applications
There are a lot of Integrated Device Technology (IDT)
71V416L10YG Memory applications.
- telecommunications
- workstations,
- DVD disk buffer
- data buffer
- nonvolatile BIOS memory
- Camcorders
- embedded logic
- eDRAM
- graphics card
- hard disk drive (HDD)
